- reuse more than 60 times.
- No need oil, easily install and remove only tapping formwork
can be falled off
- No expansion,no shrinkage,high strength
- Bearable temperature:-10–70ºC
- Anti slip
- Shorten construction period
- Glass glue can repair scratch on the surface
- Plastic plug can repair the 12-24mm diameter hole
- Rinse with water will be clean
- Rent and reuse another construction site
- Recycle at about half price in any other plastic factory
Sawing,drilling and nailing are all available.
Formwork can be easily combined
vertically and horizontally,quick and
safe,and the supporting is also easy to be
operated,advantageous to the organization
construction,effectively inproving the
Use the hollow building formwork intersecting laid with 15mm thick.
(1)Wood square of the distance:(1) on the surface of the intersection( spacing wood
square distance according to the thickness of the slab concrete, in general, the thickness
of less than 0.15m floor (spacing is 200~250m.)
(2)The shear wall(spacing according to adjust the spacing,height and thickness of the
wall to wall height of 2800mm,300mm thick wall,for example, using the formwork
(15mm thickness spacing is 100~150mm, if the shear wall ,pillar width more than 1
meter ,must add the fixed frame.
Die shear wall and column puzzle when leaving no gaps internal angle the bottom of
the wall parts must have wood square beam wall formwork connection shear wall
made 4 after the mold must be assembled into the whole hoisting then lay flat reduce
labor intensity forming effect is good.
When the nail to the formwork from the formwork edge distance 15~30mm strength
wants moderate nail nails is 40~50mmm in length should not be too long or too short.
Beam bottom of a piece of wood square must set aside 15 mm seam allowance
wallboard made on wood square seam allowance it does not leak slurry and wallboard