Metal Material Air Powered Membrane Pump for Oil Ink

Model NO.
QBK-25
Performance
Corrosion
Pump Material
Aluminum Alloy
Center Block Material
Aluminum, Polypropylene
Valve Seat Material
Ss, Teflon, Santoprene, Buna-N, Viton, etc
Valve Ball Material
Teflon, Santoprene, Buna-N, Viton, Polyuretane, Et
Pump Spare Parts
Diaphragm, Air Valve, Ball, Stainless Steel Shaft
Connection
Flange Connection
Application
Chemical Industry, Mining Industry
Features
Explosion-Proof, No Leak
Warranty
12 Month for Pump, 3 Month for Pump Spare Parts
Trademark
Y&L
Transport Package
Strong Carton
Specification
25mm
Origin
Shanghai, China
HS Code
8413501090
We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Metal Material Air Powered Membrane Pump for Oil Ink, The product will supply to all over the world, such as: Atlanta, Egypt, Philippines, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
Shanghai YL Pump Co., Ltd. Diamond / Audited Supplier
 Metal Material Air Powered Membrane Pump For Oil Ink

Introduction
QBK series pump is an air operated double diaphragm pump, which is driven by air. It is a kind of positive displacement pumps which volume changes caused by compressing diaphragms in both side. This pump not only can exhaust the flow liquid, but also can convey some uneasy flowed medium, with the merits of self priming pump, slurry pump and impurity pump, etc.

Specification

Model Inlet/outlet
Dia
Max. Flow  Head Max. Suction stroke Max. Particle
Dia.
Max. Air Supply Pressure Max. Air Consumption
inch m3/h L/min m m mm kg/cm2 m3/min
QBK-06/10 1/4 or 3/8 1.62 27 0-70 6.4 1.6 7 0.14
QBK-15/20 1/2 or 3/4 3.42 57 0-84 7.6 2.5 8.4 0.56
QBK-25 1 9.42 157 0-84 8 4 8.4 1.12
QBK-40 1.5 21.48 358 0-84 8 5 8.4 2.24
QBK-50 2 35.22 587 0-84 8 6 8.4 2.8
QBK-80 3 63.6 1060 0-84 8 9.4 8.4 9.8

Pls note that QBK06/10 refers that the inlet/outlet dia can be 6mm/6mm or 10mm/10mm, but the parameters for QBK-06 and QBK-10 are complete same

Product Images

Pump Spare Parts

Features
1. The air diaphragm pump has the function of self priming without rotating parts. It can achieve dry priming and wet priming, which self -priming height is 5m and 8m respectively.
2. With sectional type structure, this self -priming pump can be used for conveying two different liquid by double diaphragm.

3. Our pump can be used directly as a submersible pump, it uses air as the power source, and does not have the leakage and other security risks. This diaphragm pump has lower cost than submersible pump which is caused by the maintenance of motor.

4. Pumps provide stall-free, ice-free operation.
5. Bolt joint design provides even sealing pressure for optimal performance.
6. Diaphragm,ball and ball seat adopt imported materials with longer service life.
7. Due to their pneumatic motor, they could be used in potentially explosive areas.
8. Can pump corrosive , volatile, flammable, poisonous fluids with particles and high viscosity.

Application
1.The pump can suck the peanut, pickles, tomato slurry, red sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain, brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility liquid etc.
6. The pump can suck various wedge water, cement slurry and mortar etc.
7. The pump can suck various strong acid, alkali and corrosive liquid etc.
8. It can be used as a front-step transmission device of the solid and liquid separation equipment.
9. Our pump can be used directly as a submersible pump, it uses air as the power source, and does not have the leakage and other security risks. This diaphragm pump has lower cost than submersible pump which is caused by the maintenance of motor.

Our Service
1. Delivery: Delivery time will be on time as the contract. Usually, the delivery time of diaphragm pump is 5-7 working days.
2. Warranty: 1 year for the pump body, 3months for the main working parts.
3. Package: According to your quantity, we use strong carton or plywood case which is durable for ocean transport.
4. Shipping: By Sea, By Air and By International Express.
5. Payment: we can accept T/T, L/C , West Union and so on.
6. Pre-sales Service: According to your requirement, we will give you our profession advice of pump solution.
7. On-sales Service: We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you our production situation.
8. After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if u need.

Our Company