The tool post can rotate with more angle in the vertical plane,
Manual feeding is available. For tool post.
For slotting shaping more economic machining equipment.
worktable feeding on cross and vertical specially for swallow tail machining and channel machining.
suitable for single piece or small match production.
Specification of our shaping machine BC6050:
|Model||BC 6050||BC 6063||BC 6066|
|Maximum cutting length(mm)||500||630||660|
|Max.range of the horizontal movement of the table||500||630||630|
|Max.distance between the ram bottom and table||370||385||385|
|Max.length of the vertical movement of table||270||360||360|
|Dimensions of table top(L×W)||440×360||630X400||660X400|
|Max.stroke length of the toolhead||120||120||120|
|Max.swivel angle of the toolhead||±60°||±60°||±60°|
|Max.section of tool(W×T)(mm)||20×30||20×30||20×30|
|Number of ram reciprocation per minute||14-80||14-80||14-80|
|Range of table feed:||horizontal||0.2-0.25 0.08-1.00||0.4-5.0||0.4-5.0|
|Width of the T-slot for center positioning(mm)||18||18||18|
|Power of the main motor||3||3||3|
2.Rubber pad for protecting pan
4. Allen wrench
6. Crank handle
10. Foundation bolts
What about the spare part if the machine break down?
==about the machine break down, normally our policy will be as the under way
1) Our quality guarantee time is 12 months since the machine on board
2) During this period, if the machine break down owing our machine itself quality problem, we will prepare the spare parts and send to you by free within 5 days. all these will be by free.
3) If the break down is caused by the mis operation, we of course will supply you the spare parts, but we have to charge you the costs prices.
Welcome to contact us!
Tengzhou Uni-tech Co. Ltd
Tel:0632-5810216 Fax: 0632-5810216