Model: LP-3015D/ LP-4020D
Cutting area: 3000X1500mm, 4000x2000mm
Work table: Two exchanged work table
Machine enclosure: Fully enclosed machine cover
Fiber laser power: 1000W-10000 Watt
Suitable materials: Carbon steel, mild steel, stainless steel, aluminium, brass, copper, galvanized steel, electrolytic plate, various alloy plate, rare metal and other metal materials.
1. Welded aluminum gantry, light but hardness reach to T6
2. 8.5T net weight machine bed with high temperature annealing, whole steel sheet welded bed with high accuracy
3. Germany Precitec Auto-focusing Laser Head
4. Double exchanged work table
5. Chain for Table Exchanging is pretected and supported in the tunnel,making the exchange process stable.
Cutting Capability of IPG
|Recommended cooling power (kW)||2,1||4,2||6,4||8,5||12,6|
|Electrical supply (kW)||3,1||6,1||9,1||12,1||18,2|
|Maximum sheet thickness:|
|Stainless Steel (mm)||4||8||12||15||20|
Shipment in Flat Rack Container
Why Choose Fiber Laser for Stainless Steel, Mild Steel and Aluminum, etc., ?
More companies than ever before are investing in fiber lasers. While the automotive industry was undoubtedly the early adopter, this relatively new solution is being snapped up across the board and when you consider the advantages, its easy to see why.
The sheer speed of fiber laser markers makes them the first choice for customers looking to increase efficiency. Theyre the fastest laser marking technology at their wavelength, delivering marking times of less than one second for some applications. While older, more established laser technology is available-including diode-pumped solid-state (DPSS) lasers, lamp-pumped lasers, and carbon dioxide (CO2) lasers-none can beat a fiber laser for combined mark speed and quality.
This means fiber lasers can break new ground. For example, one of Laser Lines customers is an automotive component manufacturer that needs to mark serial codes exceptionally fast-in under half a second-which wouldnt be possible with any other type of laser.
Despite being faster, fiber lasers are energy-efficient compared to the alternatives. Not only does this result in reduced power consumption, but it also helps make the system simpler, smaller, and more reliable.
Fiber laser technology uses basic air cooling rather than an additional chiller unit, which would be costly and cumbersome. With many businesses finding both cash and floor space in short supply, compact and efficient fiber laser marking solutions are proving to be the right fit.
The life expectancy of a fiber laser far exceeds that of other laser solutions. In fact, the diode module in a fiber laser typically last three times longer than other technologies. Most lasers have a life of around 30,000 hours, which typically equates to about 15 years use.
Fiber lasers have an expected life of around 100,000 hours, which means about 45 years use. Saying that, will companies still be using the same fiber laser in 45 years? I doubt it! Regardless, this option does deliver an impressive return on investment.
—TUBE LASER CUTTING EXPERT!
—HIGH POWER FIBER LASER INTELLIGENT MANUFACTURER!