Hybrid Solar Inverter 12kw Pure Sine Wave Inverter with Charger

Model NO.
Power Source
Electrical Power, Solar Power
Circuit Topologies
Full-Bridge Type
Nature of Wave String
Sine Wave Inverter
Nominal Power
Nominal Voltage
Input Phase
Single Phase
Pure Sine Wave
Peak Power
3times of Rating Power
Battery Efficiency
AC Efficiency
Over Battery, Over Load, Over Charging
Electric Tools
Transport Package
Export Standard Package/Based on Your Requirement
Shenzhen, China
HS Code
"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for Hybrid Solar Inverter 12kw Pure Sine Wave Inverter with Charger, The product will supply to all over the world, such as: Manila, Nepal, Italy, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We will not live up to the historic opportunity of the times.
Shenzhen ZLPOWER Electronics Co., Ltd. Diamond / Audited Supplier
Pure sine wave inverter 8KW~12KW solar charger  power inverter

*Large LCD display show voltage,frequency,battery capacity
*Built-in AC battery charger which charging current can be adjusted
*3times of rating power
*Pure sine wave

(PW Series)
HV Model
PW8-12KW HV(230Vac)

Line Mode Specifications:

Input Voltage
Input Voltage Waveform Sinusoidal (utility or generator)
Nominal Input Voltage 230Vac
Low Line Disconnect 184Vac±4%
Low Line Re-connect 194Vac ±4%
High Line Disconnect 263Vac±4%
High Line Re-connect 253Vac±4%
Max AC Input Voltage 270Vrms
Input Frequency Nominal Input Frequency 50Hz/ 60Hz (Auto detection)
Low Line Frequency Re-connect 51+0.3Hz for 60Hz;
41+0.3Hz for 50Hz;
Low Line Frequency Disconnect 50+0.3Hz for 60Hz;
40+0.3Hz for 50Hz;
High Line Frequency Re-connect 64+0.3Hz for 60Hz;
54+0.3Hz for 50Hz;
High Line Frequency Disconnect 65+0.3Hz for 60Hz;
55+0.3Hz for 50Hz;
main functions
Output Voltage Waveform As same as Input Waveform
Over-Load Protection (SMPS load) Fuse
Output Short Circuit Protection Fuse
Transfer Switch Rating 63A/80A/100A
Max Bypass Overload Current 100A

Battery Invert Mode Specifications:

Output Voltage Waveform Sine wave
Rated Output Power (KW) 8kw/10kw/12kw
Power Factor 0.9~1.0
Nominal Output Voltage (V) 230Vac ±10% rms
Nominal Output Frequency (Hz) 60Hz ± 0.3Hz
50Hz ± 0.3Hz
DC Voltage Nominal DC Input Voltage 48V/72V
DC Voltage range 40-62Vdc for 48VDC/ 70-93Vdc for 72VDC
Low Battery Alarm 42.0Vdc ± 1.2Vdc for 48V battery
63.0Vdc ± 1.8Vdc for 72V battery
Low DC input Shut-down 40.0Vdc ± 1.2Vdc for 48V battery
60.0vdc± 1.8Vdc for 72V battery
High DC input Alarm & Fault 64Vdc ± 1.2Vdc for 48V battery
96Vdc ± 1.8Vdc for 72V battery
High DC input Recovery 62.0Vdc ± 1.2Vdc for 48V battery
93.0Vdc ± 1.8Vdc for 72V battery
Charger Nominal Charge Current 35A/50A(5 stages adjustable charging current)
Charge Current Regulation ± 5Adc
Over Charge Protection Bat. V ≥62Vdc / 93Vdc, beeps 0.5s every 1s & fault after 60s
Algorithm Three stage:  Boost CC (constant current stage) → Boost CV (constant voltage stage) → Float (constant voltage stage)
Efficiency Efficiency (Battery Mode) ≥85%
Efficiency (Line Mode) >98%
Transfer Time Ac to Dc 20ms (Max)
Dc to Ac 15ms (Max)
System parameter Over-Load Protection 110% <load<150%, beeps 0.5s every 1s, and Fault after 60s off the output, Load>150%, beeps 0.5s every 1s, and Fault after 20s.
Output Short Circuit Protection Current limit (Fault after 10s)
Surge rating (10s) 1:3 (VA)
Power saver Load <=25W (Enabled on “P/S auto” setting of Remote control)
Protections Low battery, over charging, over load , over temp.
Indicators LED+LCD Display
General Specifications Operating Temperature Range 0°C to 40°C
Storage temperature -15ºC ~60ºC
Operation humidity 5% to 95%(non-condensing)
Audible Noise 60dB max
Cooling Forced air, variable speed fan
Dimension(L*W*H) 538*255*630mm
Net weight(Kg) 8KW 10KW 12KW
60kg 65.5kg 71kg