The laser tube cutting machine can realize high-speed high-quality laser cutting on profiles such as round tubes, square tubes, rectangular tubes, elliptical tubes, angle steels, channel steels and shaped tubes. Compared with the advantages of traditional cutting, the flexibility is good, no need to open the mold, which greatly saves the development time of new products; the speed is fast, the precision is high, and the various shapes and complexities of pipe opening, cutting, intersecting lines and conventional methods are difficult to realize. Precision cutting of graphics.
1.Control system (CONTROLSYSTEM) Germany PA8000 (Germany PA8000)
2. Laser (LASER SOURCE) IPG
3. Cutting (LASER HEAD) Raytools
4. Servo motor (SERVO MOTOR) Yaskawa (YASKAWA)
5. Chuck (CHUCK) front and rear double pneumatic (DOUBLE PNEUMATIC CHUCKS)
6. Positioning accuracy (POSITIONING ACCURACY) ±0.03/1000mm
7. Repeat positioning accuracy (REPEAT POSITIONING ACCURACY) ± 0.02
8. Nesting Software (NESTING SOFTWARE) Lantek
9. Total weight of equipment (G.W.) 12t
The bed is made of 16-25MM steel plate, which is cut and welded in the whole plate. After welding, the whole bed is placed in the furnace and heated to 600 degrees. Then it is kept to 200 degrees and then removed from the furnace for natural cooling. After the heat aging, the whole bed will be placed on the COLGAR large milling machine for planing and milling, and the whole process will last for 15-20 days.
Front pneumatic chuck, self-centering, equipped with 5.0KW Yaskawa servo motor chuck speed, 120 rev / min, adjustable pinch pressure, two relative jaws advance and retreat at the same time, can effectively grasp a variety of pipes. The chuck jaws can be adjusted in three levels, and can stably hold various shapes of pipes of different diameters of 20-200mm. Also equipped with a French Motoy reducer.